Finite element analysis of partly wrinkled reinforced prestressed membranes

Wrinkling is a well known phenomenon experimented by tension membranes in Civil Engineering applications. This paper will present an efficient numerical technique for the computational simulation of such wrinkles in a prestressed membrane. In particular, the relaxed energy approach (Pipkin in IMA J Appl Math 36:85–99, 1986) is particularized for prestressed membranes (Gil in Textile composites and inflatable structures, CIMNE, 2003) undergoing moderate strains. Wrinkling conditions in terms of the Euler-Lagrange finite deformation tensor along principal directions will be obtained. This will provide a framework to describe properly the initial instant when wrinkles start to be encountered in a prestressed Saint Venant–Kirchhoff hyperelastic membrane. Subsequently, a modified Helmholtz’s free energy functional will be introduced with the purpose of describing the modified constitutive behaviour of the continuum after the onset of wrinkling. Consistent derivations of the stress tensor as well as the constitutive tensor will de depicted. The results will be particularized for membranes and cables in a Finite Element discretization basis. Some numerical examples will prove the accuracy and robustness of the described algorithm.     

泡沫铝的动态压缩性能和吸能性研究

通过测量泡沫铝在动态和准静态压缩条件下的应力 -应变曲线 ,研究了泡沫铝的准静态和动态压缩行为以及不同应变条件下的吸能性 ,并对其应变率效应进行了分析。结果表明 ,在高应变速率和准静态压缩下 ,泡沫铝的σ -ε曲线均表现出弹性变形段、平缓段和密实段三阶段特征 ;泡沫铝的压缩性能具有明显的应变速率敏感性 ,随应变速率的提高 ,流动应力上升 ,吸能性升高     

Cost-Benefit Analysis of Residential Energy-Efficiency Upgrades in Phoenix, Arizona

With worldwide energy consumption rising, there is a need to reduce energy use of the housing stock. While this general idea is well-known, there is an overwhelming amount of product data and manufacturers claims through which the homebuilder or designer must sort to make informed selections of energy-efficient upgrades. The main objective of this research was to identify cost effective–energy efficient upgrades from a group of 16 commonly available choices, and rank them according to the most beneficial for the least cost. This study was conducted in Phoenix, Arizona, and included a sample of 30 production-style homes typical of the Phoenix metropolitan area. Energy-simulation software was used to perform energy evaluations and derive the benefits of each upgrade. The cost of each upgrade was obtained from a database of national average costs and from a local context. Differences in the selection of beneficial upgrades vary dramatically with the source of the cost information. This research provides a generic methodology that can be used by builders and designers to select appropriate energy-efficient upgrades for a given geographic area that will provide high operating benefits relative to the amount of capital investment.     

Forecasting of Turkey's net electricity energy consumption on sectoral bases

In this study forecast of Turkey's net electricity energy consumption on sectoral basis until 2020 is explored. Artificial neural networks (ANN) is preferred as forecasting tool. The reasons behind choosing ANN are the ability of ANN to forecast future values of more than one variable at the same time and to model the nonlinear relation in the data structure. Founded forecast results by ANN are compared with official forecasts.     

Integration of a Malt Drying Model into a Malt Plant Scheduling Software

Malting is a very intensive, energy-consuming process and, from the point of view of energy, green malt drying is one of the most important operations. Double-deck kiln drying, a variant of single-deck kiln drying, is the most commonly used process, but it is usually manually controlled under empirical control actions. These are the reasons why a research project was carried out based on the computer modeling of these process operations including a software tool named CIMFOOD. A knowledge-based system (KBS) allowing the entire processing-plant dynamic behavior simulation and scheduling concerning thermal energy requirements was developed.     

Optimization of metal-based multilayers for transparent heat mirrors

Multilayer calculations by conventional matrix methods for dielectricum/noble metal/dielectricum systems on glass have been performed. The aim has been to maximize the integrated parameters for solar transmission, T_sol, and transmission of visible light, T_eye We have found that Ag is superior for maximizing the transmittance over the narrow visible wavelength range owing to the low internal absorptance. When solar energy transmission is considered multilayers based on Au are the best choice for metal film thicknesses above 15 nm. For thinner films, Ag is still to be preferred.     

Means of enhancing and promoting the use of solar energy

The development of renewable technologies in the last decade has been exceptional. In photovoltaic (PV) for example, efforts were not only limited to merely improving their efficiency but also to the reduction of the cost of cells and modules via volume production for commercial markets. There are many national schemes promoting the use of PV technology and regional targets for a share of renewable energy production. This paper attempts to relay to the reader a journey, based on experience, approaches for enhancing the prospect of utilising solar energy within the society we live in. The issue of expansion or enhancing the utilisation of solar energy can be undertaken by individuals, groups, institutions and governments. The aim of this paper is to provide some examples, which could serve as a framework in which action could be taken to promote solar technology.     

太阳能热管的研制和应用

介绍了太阳能热管发展的社会背景和历史沿革、太阳能热管单管的工质选择和管壳结构、热管式真空集热管的结构特点及太阳能热管在热水器中的应用     

Analyses of the practical adhesion strengths of the metal/polymer interfaces in electronic packaging

There is a plethora of techniques to measure the adhesion strength of metal/polymer interfaces. However, the practical adhesion strength, which is the work done in separating the film from the substrate (or one film from another), is very sensitive to the test methods and the mechanical effects, such as the residual stress, thickness and mechanical properties of the layers, strain rate, and phase angle. Deriving intrinsic-adhesion properties of the interfaces, which are independent of such parameters, from the practical adhesion-strength measurements is a formidable task. In the present work, data from the three commonly used adhesion tests; pull-out, 90°-peel, and T-peel tests are compared with the intrinsic-adhesion properties of the interface, such as the interface-fracture toughness or the interface-fracture energy, and their implications are discussed. Material systems analyzed were Cu-based lead frame/epoxy-molding compound (EMC) and Cu/Cr/polyimide.     

码头建筑物对水位影响的模型试验及计算方法

河岸码头建筑物势必导致其上游水位壅高及对码头附近水流流态产生影响。以汉江沙洋河段为对象 ,通过定床概化物理模型试验研究了码头建筑物对河道水位与流速场的影响。并基于能量平衡原理 ,采用河道恒定非均匀流水面曲线基本方程 ,结合物理模型试验资料 ,计算了码头建筑物附近的水位变化值 ,并提出了码头建筑物产生的水位壅高值的计算方法。